Salient Features :
     
   

The machines are built with fully enclosed CAST IRON body. These are SEASONED & precisely calibrated for accuracy. The special CLAMPING CONE holds the job firmly and avoids slippages. This also protects the INDENTORS. Transparent glass cover covers the dial gauge. It protects form dust damages. The loading is by square threaded screw & unloading is by eccentric lever while penetration is Hydraulic.
     
    The different models are available as described below.
     
     
     ROCKWELL HARDNESS TESTER :
     
    1. AZ - 150:
     
    * Manual load selection, Auto zero setting type dial gauge.
* 60,100 & 150 kgf load range to check Rockwell scale.
     

2. ALZ – 150:

  
       
    * Automatic load selector provided at right side of the machine.
* Automatic zero setting type dial gauge.
* 60, 100 & 150 kgf major load.
* To check Rockwell Scale. 		 
       
     STANDARD ACCESSORIES :  
   
1.
 One dial gauge Dia. 80 mm.
2.
 One flat table Dia. 50 mm.
3.
 One Vee grooved table for cylindrical job Dia. 6 mm to 45 mm.
4.
 One Diamond indenter with 120° cone angle.
5.
 One test block master for Rockwell “C” scale.
6.
 One ball indenter 1/16” dia.
7.
 One test block for Rockwell “B” scale.
8.
 An Allen key 3/32” and 5/32".
9.
 A set of telescopic sleeve for screw protection.
10.
 One set of weight, 60,100 & 150 kgf. Cast Iron.
11.
 Accessories kit Box for above accessories.
20.
 One instruction Manual.
21.
 Levelling bots (Four)
22.
 One Machine Cover.